GL DMX & RDM Controller

  • DMX512&RDM Pixel Controller CT-100

    DMX512&RDM Pixel Controller CT-100

    1. 256 brightness levels.
    2. 33 built-in self-running modes, 100 speed levels adjustable.
    3. Control channels optional in 4CH, 6CH, 8CH or 512CH.
    4. 512 DMX pixels controllable, 640 coding addresses.
    5. Remote controlled by IR signal.
    6. DMXtransmission speed in standard 250Kpps.
    7. Support DMX512 and master/slave mode.
    8. Support DMX512 protocol, also support RDM protocol with device searching, coding, address cide modification, channel control mode, control channel quantityetc.
    9. Prevent damage caused by factors such as lightning and electric current flow-backwards, with over voltage and short circuit protection.

    Email Details
  • DMX512 Pixel Controller CT-101

    DMX512 Pixel Controller CT-101

    1. 256 brightness levels.
    2. 33 built-in self-running modes, 100 speed levels adjustable.
    3. Control channels optional in 4CH, 6CH, 8CH or 512CH.
    4. 512 DMX pixels controllable, 640 coding addresses.
    5. Remote controlled by IR signal.
    6. DMX transmission speed in standard 250Kpps.
    7. Support DMX512 and master/slave mode.
    8. Prevent damage caused by factors such as lightning and electric current flow-backwards, with over voltage and short circuit protection.

    Email Details
  • DMX512 Pixel Controller K-1000C

    DMX512 Pixel Controller K-1000C

    1、32 to 65536 degree Gray control, Gamma correction procession handle.
    2、Support various point, line light source, and all kinds of rules and specific shaped handle.
    3. The controller has one output port, can support up to 512/2048 pixels(DMX lighting support up to 512
    pixels).
    4、Play content stored in the SD card , the SD card can store up to 32 effects File, SD card capacity
    support 128MB-32GB.
    5、The controller can single set use,also multiple controllers cascade, cascade optical isolation mode:
    interference, better stability, cascade distance between two controllers can reach up to 150 meters, need
    to use 0.5M² pure copper power cord.
    6、The controller support chip can lock the support IC in software, or not lock the support IC in the
    software, select the support IC through the controller CHIP button, this scheme is more flexible and
    convenient.
    7、For the DMX lighting IC, the controller comes with write address function; In addition, with
    use of our 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.
    8、Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.
    9、Enhanced 485 TTL and 485 differential (DMX) signal output.
    10、The controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2
    red, green, blue and black gradient; 3 red, green, blue and goes.

    Email Details
Would you like to know more details? We will respond as soon as possible in 24 hours, once receiving your following request.

Privacy policy