Your Location:  Home > Product Information > Waterproof LED Strips >Streamy single color 5050 waterproof led strip light

Streamy Single Color 5050 Waterproof LED Strip Light

The traditional monochromatic light strip only meet the requirements of lighting, to join the digital control can be achieved after the effects of different changes, such as chasing, flowing water, changes in mode of transition, so that light source to achieve vivid, brilliant results.For home cabinets, ceilings, decorative objects, outline lighting.

Streamy Single Color 5050 LED Strip light can be in waterproof:
A type, waterproof with Silicone Tube IP67;
B type, waterproof with Silicone Glue IP68;
D type, waterproof with Heat-shrink tube IP68;

• Waterproof method :
• 
• Waterproof Material:
• Silicone hollow tube ,Silicone glue and Silicone transparence waterproof connector

• Features:
• 1.Anti-oxidation, anti-UV radiation and won‘t change color after long time use.
• 2.High flexibility ,high transparence, flame-proof and environmental friendliness.
• 3.Silicone material offers good heat or cold resistance and is not easily broken.
• 4.With silicone transparence waterproof connector can easily connect and totally waterproof .
• 5.Streamy single color 5050 waterproof led strip light is a upgrade of traditional monochrome light strip to overcome the effects of a single color LED strip shortcomings; controller can be realized with the forward, reverse, water flow change modes.
• 6.Controller integrated DMX control system interface can be used in conjunction with the DMX 512 control system to achieve individual needs of dynamic transformation
• 7.Controller can be used alone, but also many on-line use of large-scaleusage requirements.
• 8.Available Red/Green/Blue/Yellow/Pure White/Warm White.
• 9.This 5050 waterproof led strip light max power 72W.
• 10.This 5050 waterproof led strip can be cut by 3 LED and connect again by our accessories.

• Parameter:

• Part Number	LED Q'ty	LED Type	CCT Range	Size(MM)	Λd(nm)/Tc(K)	Flux(±5%)	Max Power	Lifetime
  GL-FM-PW	300PCS	5050	Pure White	5000X12	5500-6500K	2787.1lm	72W	30,000h
  GL-FM-WW	300PCS		Warm White		3000-3500K	2332.4lm		30,000h
  GL-FM-R	300PCS		Red		620-625nm	709.9lm		50,000h
  GL-FM-G	300PCS		Green		520-525nm	1860.5lm		50,000h
  GL-FM-B	300PCS		Blue		465-470nm	670.7lm		50,000h
  GL-FM-Y	300PCS		Yellow		585-590nm	593.4lm		50,000h

  The data above is under the test condition of Ta =25 degree ,DC 12V ,RH 85%

• Dimension:
• 

• Connect Drawing:
• 

• Operation Guidance:
• 
• To cut and seal at one end of 5050 waterproof led strip, please follow the steps: A1 A2 A3 B1 B2
• To cut and install waterproof connector at one end, please follow the steps: A1 A2 A3 C1 C2 C3 C4 C5
• A1 : Cut the 5050 waterproof led strip at the mark ”scissors” or by every 3 LED's.
• A2: Screw to open the glue cap.
• A3: Use the thrust (another side of glue cap ) to puncture the surface .
• B1: Inject the silicon gel into the end cap without holes.
• B2: Push the strip into the cap and let gel dry for 1 hour.
• C1: Put the connector wire through the end cap holes.
• C2: Solder the wire onto the PCB .
• C3: After solder the two wires, push the strip into the end cap with wires carefully.
• C4 : Inject the silicon glue at the end of strip and cap.
• C5: Make sure end cap and strip are connected well and let gel dry for 1 hour.

• Note Of led light strip :
• 1、please make LED drivers compatible with flexible LED strips before use LED strips.
• 2、To use 5050 waterproof led strips 5M in serial, longer than 5M in parallel.
• 3、Before use,first check the power supply used in compliance with of the power requirements.
• 4、Each roll ask for independent power supply;not to use of multi-volume series use.