Your Location:  Home > Product Information > Flexible LED Strips >Streamy single color 3528 led light strip

Streamy Single Color 3528 LED Light Strip

The traditional monochromatic light strip only meet the requirements of lighting, to join the digital control can be achieved after the effects of different changes, such as chasing, flowing water, changes in mode of transition, so that light source to achieve vivid, brilliant results.For home cabinets, ceilings, decorative objects, outline lighting.

Streamy Single Color 3528 LED Strip light can be in waterproof:
A type, waterproof with Silicone Tube IP67;
B type, waterproof with Silicone Glue IP68;
D type, waterproof with Heat-shrink tube IP68;

• Features:
• 1.Streamy single color 3528 smd led strip light is a upgrade of traditional monochrome light strip to overcome the effects of a single color LED strip shortcomings; controller can be realized with the forward, reverse, water flow change modes.
• 2.Controller integrated DMX control system interface can be used in conjunction with the DMX 512 control system to achieve individual needs of dynamic transformation
• 3.Controller can be used alone, but also many on-line use of large-scaleusage requirements.
• 4.Available Red/Green/Blue/Yellow/Pure White/Warm White.
• 5.This light strips led max power 21.6W.
• 6.Can be cut by 9 LED and connect again by our accessories.

• Parameter:

• Part Number	CCT Range	LED Type	LED Q'ty	Size(MM)	Tc(K)	Flux(±5%)	Power(Max)
  GL-DFA-PW	Pure White	3528	600PCS	5000X10	5965K	3342lm	49W
  GL-DFA-WW	Warm White		600PCS		3153K	3520lm	50W
  GL-DFA-R	Red		600PCS		1001K	1033lm	50W
  GL-DFA-G	Green		600PCS		7594K	3045lm	63W
  GL-DFA-B	Blue		600PCS		100000K	858lm	58W
  GL-DFA-Y	Yellow		600PCS		1567K	682lm	47W

  The data above is under the test condition of Ta =25 degree ,DC 12V ,RH 85%

• Dimension:
• 

• Connect Drawing:
• 

• Operation Guidance:
• 
• Step A 1 : Pull out the black clip carefully
• Step A 2 :Cut the led light strip at the mark “scissors” or by every 9 LED’s.
• Step A 3 : Put the led light strip in the space between the clip and connector .
• Step A 4 : Push the clip in original position
• 
• Step B1 : Pull out the black clip of each side carefully.
• Step B2 : Pull the led light strip in the space between the clip and connector at one side.
• Step B3 : Put the led light strip in the space between the clip and connector at the other side ,and push the clip in original position.

• Note Of led light strip :
• 1、please make LED drivers compatible with flexible LED strips before use LED strips;
• 2、To use LED light strips 5M in serial, longer than 5M in parallel;
• 3、Before use,first check the power supply used in compliance with of the power requirements;
• 4、Each roll ask for independent power supply;not to use of multi-volume series use;