led feadback  Feedback
      led video  Video of GL

Home > News > 8mm LED Panel Light Installation

  • Thickness 8mm LED Panel Light Installation Manual


    led panel light

    Note logo 1. Thanks for buying the panel light, please ask professional person to install, to avoid failure or damaging to the products.
    2. Please test before purchasing, if there are dark zone, can't lighting and scratch, please ask for changing or return the goods.
    3. If need repairment, please contact the retailer, don't repair or refit in private, or the damage caused is not responsible by the saler


    8mm LED Panel Light Specification:
    1. The Material :
    Adopt imported LED chip, high output and high power efficiency, energy saving more than 50%.High CRI, which can show you the best truely color of the goods and the environment
    Using high quality aluminum frame, with high heat dissipation character, ensure the long lifespan of the LED.Adopt high efficiency light guide board, light transmition rate more than 85%
    2. Design led light panel:
    With ultra-thin of 8mm design, simple and beautiful.Available size: 300*300mm, 300*600mm, 300*1200mm, with single color and dimmable for choice.
    3. Features :
    Wide imput voltage, start fast, no flickering, no daze and no noise.Adopt self designed high PF LED driver, PF>0.9, ensure the stability of the products and aftersale service. The luminous efficacy more than 85LM/W,the light decease rate less than 3%/1000h.
    4. Installation for led panel light:
    Easy and fast, hanging, embedded and ceiling as you want.

    Prompt Signs:
    To ensure right installation, please take attention to the means of the Marks in the manual.
    NoteNOTE: give the method and other infomations to finish the job.
    WarningWARNING :inform to take care of yourself and be safe when working.
    ImportantIMPORTANT: must to do as the manual said when installation led panel lamp.

    INSTALLATION NOTE FOR LED PANEL LIGHT: Note
    1. please ask professional person to install, to avoid failure or damaging to the led panel lamp.
    2. pease turn off the power before installation, ensure the right connection of positive and negtive terminal.
    3. The LED panel lights are fragile products, please take and put softly when installation, to ensure the best character.
    4. If installation not followed as manal, the damage caused is not responsible by manufacturer.
    5. Suggest to connect the power supply imput terminal with AC line after installation finished.


    installationEMBEDDED INSTALLATION FOR LED PANEL LAMP:
    1.Take out the power supply(P1).
    2.After take out the power supply, put it into the back side of the panel light(P2).
    power supply for led panel light
    NOTE:Note
    a.when instal the power supply, please put a soft cushion on the floor, ensure no scratch or damage to the panel light.
     b.The place and orientation of the power supply not limited.
     c.Please take and put softly when installation, to ensure the best character

    3. After the installation of imput and output of power supply, please put the panel on the ceiling(P3.4)
    put the led panel light on the ceiling

    4.Turn the front side against the floor(P5.6).
    led panel lightNOTE:Note
    a. Turn 45 degreee, and then put the panel on the ceiling, please don't forced to squeeze or crossing the ceiling.
    b. Please take and put softly when installation, to ensure the best character.
    c. If need embeded way to instal the panel, please make sure the size of the panel are the same with the ceiling.

    5. Adjust the alignment of panel and the ceiling, then finished(P7)
    installation for 8mm led panel lamp 6.After installation, turn on the power to check(P8).
    installation for 8mm led panel lights
    NOTE:Note
    1.when instal the power supply, please put a soft cushion on the floor, ensure no scratch or damage to the panel light.
    2.The place and orientation of the power supply not limited.
    3.Please take and put softly when installation, to ensure the best character



    installationHANGING INSTALLATION FOR LED PANEL LAMP:

    1. Fix the hanging line on the ceiling.(P9.10.11)
    led panel lights   a.punch two Φ5mm holes in the ceiling.
      b.fix the expansion screw into the hole.
      c.lock the fixed seat into expansion screw with self-taping screw.

    2. Lock sleeve onto the thread of the led panel light.(P12)
    led panel lights

    3.Connect the input line of power supply with AC power.(P13)
    4.After installation, turn on the power to check.(P14)
    led panel





    installationCEILING INSTALLATION FOR LED PANEL LIGHTS:
    1.Punch two Φ5mm holes in the ceiling, fix the expansion screw into the hole.(P15)
    led panel lamp
    2.Put the screw through the 4 holes of the panel, and then fix into the hole.(P16)
    3.After the screw fixed, put in the plastic plug and tamp down.(P17)
    led panel
    4.Connect the panel light input line with output line of the power supply. And then connect the power supply with main supply, turn on the power, you can check the lighting effect.(P18)
    led panel
    Many other LED Panel Light for available.

    Thickness 12mm LED Panel Light Installation Manual

Contact Us
General lighting Electronic Co.,Ltd.
Tel: +86-769-82253316
Fax: +86-769-82253301
Mail: info@gl-leds.com
Web site: www.gl-leds.com
Address: F Building,Julong Industrial Park,Tianxin Meitang Community,Huangjiang Town,Dongguan,China
Feedback
Please click "Feedback" to leave your message and we'll reply you as soon as possible.
Certificate
led certificate

LED Light LED Tube LED Bulb LED Spotlight LED Panel light LED Strip LED Light Bar Contact GL

General lighting Electronic CO.,LTD. Copyright © 2010 . All rights reserved.General Lighting Electronic Co., Ltd. All rights reserved. No part of this photo may be reproduced, in any form or by any means, without permission inwriting from General Lighting Electronic Co. Ltd.
Top