Your Location:  Home > Product Information > Flexible LED Strips > RGB LED Strip Light

SMD 5050 RGB LED Strip Light

This 150pcs/300pcs LED Strip Light is to satisfy people`s demand for high-brightness white light,you can replace the indoor lighting also has a good decorative effect.

• Features:
• 1: Red/Green/Blue/Yellow/Pure White/Warm White available.
  2: 3pcs LEDs per unit; Can be cut by 3 LED(DC12V)and 6LED (24V)and connect again by our accessories.
  3: With accessories to help strip easy installation, strip continuous connection and strip connection to LED drivers.
  4: With 3M adhersive tape back,easy for installation.
  5: Can be changed into waterpoof with type A and typeB.
  6: Input Voltage DC12V or DC24V.

• This Flexible LED strip lights can be in waterproof:

A type: waterproof with Silicone Tube IP67;
B type: waterproof with Silicone Glue IP68;
D type: waterproof with Heat-shrink tube IP68;

• 

• Parameter:

• Part Number	LED Q'ty	LED Type	CCT Range	Size(MM)	Tc(K)	Flux(±5%)	Max Power	Lifetime
  GL-FB-RGB	150PCS	5050	RGB	5000X10	8109K	364lm	36W	30,000h
  GL-DFB-RGB	300PCS		RGB		7805K	640lm	72W	30,000h

  The data above is under the test condition of Ta =25 degree ,DC 12V ,RH 85%

• Dimension:
• 

• Connect Drawing:
• 

• Application :
• Architectural lighting for window ,archway ,canopy and corridor.
  Decorative lights for holiday ,event ,show,exhibition .
  DIY light for home use.
  Backlight or edge lighting for sign.



• Operation Guidance:
• 
• Step A 1 : Pull out the black clip carefully.
  Step A 2 :Cut the LED light strip at the mark “scissors” or by every 3 LED’s.
  Step A 3 : Put the light strip in the space between the clip and connector .
  Step A 4 : Push the clip in original position.
• 
• Step B 1 : Pull out the black clip of each side carefully.
  Step B 2 : Pull the flexible led strip in the space between the clip and connector at one side .
  Step B 3 : Put the flexible led strip in the space between the clip and connector at the other side ,and push the clip in original position.
  
  
• Accessories:
• 


• Note:
• 1、Please make LED drivers compatible with flexible LED strips before use LED strips;
  2、To use LED strips 5M in serial, longer than 5M in parallel;
  3、Before use,first check the power supply used in compliance with of the power requirements;
  4、Each roll ask for independent power supply;not to use of multi-volume series use;